Choose language

Optional this device may be fitted with a terrestrial or satellite receiver in order to operate as a television repeater for the UHF band , with an output power of 10W .

When in satellite recieve mode the device can display scrambled channels with the use of a smart card thus making it ideal for transmitting tv programms to remote locations where reception is poor.

Contact us for more details!

copyright 2004 - 2005
ELEKTRON
 
 
 
 
UHF TV Exciter - Repeater

Modulator

  • Video carrier frequency : 38.9MHz
  • Video input level , impedance : 1Vpp, 75 Ohm
  • Video response : 25Hz : 5MHz
  • Video modulation : C3F (negative AM with clamper)
  • Differencial gain : < 1%
  • Differencial phase : < 1degree
  • Audio subcarrier frequency : 33.4 MHz
  • Audio input level , impedance : 0 dBm , 600 Ohm
  • Audio response : 20Hz : 15KHz
  • Audio proepmhasis : 50 microsec
  • Audio destortion : < 0,4%
  • Audio modulation : FM (F3E) +/- 50KHz
  • Video carrier output level : - 20 : 0dBm
  • Audio subcarrier output level : - 10dBm below video level

Upconverter

  • Input frequency : I.F. 38,9 MHz (VC) 33,4MHz (AC)
  • AGC control range : > 35 dB
  • Group delay : > +40ns
  • Local oscillators : synthesizer (CH 21-69)
  • Standard oscillators frequency stability : > + 3p.p.m.
  • Offset oscillators frequency stability : > + 0,5 p.p.m.
  • Output frequency range : UHF 470 - 860 MHz
  • Output impedance : 50 Ohm
  • Output connector : N female
  • Output power : 10 Wps
  • Intermodulation : threetone < 54dB
  • Operating temperature : 0 / +45 C
  • Operating voltage : 230V AC + 10%, 50Hz
  • Power consumption : 200 W
  • Size : 483mm x 132mm x 525mm (19" Rack 3U)
  • Weight : 15 kg
Specifications
Contact us
 
SPECIFICATIONS ARE VALID FOR THE NOMINAL POWER RATINGS
SPECIFICATIONS MAY CHANGE WITHOUT NOTICE